Power Steering hook up on 350 IH

Anonymous-0 · Aug 7, 2013

To Whom:

I have a 350 IH , I am installing Power Steering
on it and haven't done this job before. I have purchased the Power Steering Unit that was MFG. for it. Can some one take pictures of how the units
hook up & where the hoses hook up ?

I would really appreciate the help ! Can pay for effort & time.

Joe Hron

pete 23 · Aug 7, 2013

I don't know from your question if you have all the other parts that go along with the torque generator or not. You need the regulator valve assembly that contains the flow divider for steering, different first aux valve in the stack and pipe running between flow divider and first valve. Hose to steering comes out of fitting on flow divider valve and return goes into the drain on reservoir with a T so you can still drain it without taking hose off. Now for the big problem. Almost all of those old flow divider valves are worn and don't work well. I was able to get the new spool for flow divider just a few years ago but do not know if it is available now. That is usually but not always the main problem. Bore can be worn also. You could put on a separate belt driven pump though like the add on char-lynn units use.

Strikefalcon · Aug 9, 2013

Is that a Row crop or a Utility?

Power Steering hook up on 350 IH

Anonymous-0

Well-known Member

pete 23

Well-known Member

Strikefalcon

Member

Similar threads