Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum

42 m axel

Welcome Guest, Log in or Register
Author  [Modern View]

04-03-2013 12:34:00

Report to Moderator

left axel housing is leaking oil can I pull the housing and axel back to clean and install new gasket with out pulling axel all the way out do you have to remove pto and take nut off??

[Log in to Reply]   [No Email]

04-03-2013 19:23:21

Report to Moderator
 Re: 42 m axel in reply to rustym, 04-03-2013 12:34:00  
thanks that is what I wanted to do

[Log in to Reply]  [No Email]

04-03-2013 17:14:01

Report to Moderator
 Re: 42 m axel in reply to rustym, 04-03-2013 12:34:00  
I have got lucky a couple of times and went in the PTO hole and loosened the bolt on the bull gear and slid the axel out a half inch and cleaned every thing up good and cut the gasket at the top and put it together that way. Just use a little RTV where you cut the gasket.


[Log in to Reply]  [No Email]
Tim Yates

04-03-2013 13:01:48

Report to Moderator
 Re: 42 m axel in reply to rustym, 04-03-2013 12:34:00  
Pull the pto and work through the hole

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy