H=300U oil pan?

Anonymous-0 · Mar 24, 2013

Is a Farmall H and Super H oil pan the same size as a 300 utility?
Thanks

Janicholson · Mar 24, 2013

I believe they are. The U might have no petcocks, but I think they are the same bolt pattern and depth. Look at the parts diagram, it might show either the same part number, or an illustration indicating sameness. Jim

Zachary Hoyt · Mar 24, 2013

The 300 Farmall row crop oil pan looks to be the same as an H or Super H except for the petcocks as Janicholson noted. I do not know about the 300U as I have never been around one much.
Zach

D Slater · Mar 24, 2013

Yes they work. Only difference is the 3/8 pipe threads in the side of the pan on all H and SH and two types of drain plugs. If you get a H one it will probably have a pipe plug drain. Need to use it because that's not like the 300 plug. Oil level check holes can be plugged for 300U use.

Anonymous-0 · Mar 24, 2013

They use the same pan gasket part number, variations in pan unknown by specific model.

Tim Yates · Mar 26, 2013

The 300/350 utility pans will bolt right on the H block. The utility tractor has oil dipsticks in the block with no pet cocks in the pan. The H block then would be hard to check oil level.

H=300U oil pan?

Anonymous-0

Well-known Member

Janicholson

Well-known Member

Zachary Hoyt

Well-known Member

D Slater

Well-known Member

Anonymous-0

Well-known Member

Tim Yates

Member

Similar threads