m 3-point hitch

dray s

New User
i bought used 3-point for my m not sure how it mounts or if i got all parts to mount and can i still use my draw bar appreciat any help
 
It depends upon they manufacture of the 3 point. The one that I got on my SMTA allows me to use standard drawbar. The only problem I have is that the 3 point lift arms will hit drawbar before the implement goes down enough.
 
any pics of how it would attach to axel and of draw bar just trying to figur out whear to start
 
It mounts to the inner axle housing brackets. With Saginaw the original drawbar bolts to the 3 point. No problem with implements not lowering.
 
The hitch is self explanatory if you have the brackets on the axle housings. You can't use the original drawbar brackets because the 3 point uses them. As mentioned the original drawbar bolts to the 3 point Saginaw, you remove the original attachments from the drawbar. Some 3 points have their own drawbar. If not you have to attach a one piece drawbar to the sockets in the lower 3 point arms.
 
Here are a couple of pics,(If this helps???)

The first one is of course WITH OUT a drawbar,The second is mine WITH the drawbar.
a105512.jpg

a105513.jpg
 
thank you very much for the pics that sheds light on things getting a look at one mounted and all the info guys
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top