fast hitch to 3 pt

There are Prongs that go into the fast hitch that are intended for cat 1 or 2 equipment. Then you get a toplink bracket, and bolt it to your tractor for the toplink. I have these setups for my 450 and 806, they work pretty well.

They can be had from A+I parts dealers, and also on EBAY. There are probably other sources, but that's how I've purchased the 2 sets I own. -Andy
 
this tractor has the old style fast hich solid wish bone type like the 560's were not separate lift arms we have the prongs but its not the right with for cat 2 hitch
 
Post a picture of what you have. It should be/could be possible to move shims and/or switch bractets side to side on the adapter you already have. Armand
 
You can buy 'prongs' that are offset for cat 2.My old 2 point had enough slop that the cat 1 'prongs' would work for both 1 & 2.Steve
 
All you need are the 3pt hitch parts off another 656, or maybe a 544, to turn your 656 into a 3pt tractor.

It's a simple matter of unbolting the fast hitch parts and bolting on the 3pt parts.

If you want to use adapter prongs, you just need to get the right prongs to fit the implement. They don't always build the 3pt implements to the proper dimensions.
 
Okay,( dumb question of the day) I already have the slide in parts to make the 3pt on my 560, what have you guys done for the top link mounting part?
 
The one on my 450 was home made, and goes over the rockshaft. I don't have a picture of mine right now. I found this while looking for a picture for you, this looks like it bolts up to the rockshaft arms. I'm having a hard time finding a picture of something just like mine, Maybe I'll try to post one for you over the weekend. -Andy
Top link Bracket
 
Here is one I made, and it works good.
church007-1.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top