Dave H (MI)
Well-known Member
Working on getting an IH 115 mid-mount sickle mower on a SMTA. There are two elbows coming out of the left side of the hydraulic reservoir which are capped off. I am only going to be using one of these for the one-way cylinder on the mower. Planning on putting a quick-disconnect on one of these elbows and attaching my hydraulic line to it. Cannot find a lot of info in the manuals on doing this but it seems to be the way to go...right?
Also, the mounting plate that attaches to the side rails wants 7/16" spacers...I presume so that it will clear existing bolt heads in the rails. Don't have spacers and don't know a source for these. I can stack some washers to get it close for now. Spacers in the manual look like square nuts. Kid at TSC just sorta stared.
Also, the mounting plate that attaches to the side rails wants 7/16" spacers...I presume so that it will clear existing bolt heads in the rails. Don't have spacers and don't know a source for these. I can stack some washers to get it close for now. Spacers in the manual look like square nuts. Kid at TSC just sorta stared.
