1206 IHC steering and hydrolic problem.

Anonymous-0 · Dec 8, 2008

The tractor is currently hooked to a bale processor and was working fine. I parked it the other night, shut off the tractor and everything was as it should be. The next morning I started it and let it warm up like always, but when I put it in gear it would not drive. The steering would not work either. The PTO and implement hydrolics were working like they should. The problem is it will not steer and will not drive in any gear. Any help with this problem would be greatly appericiated.

MIKE FRENCH · Dec 8, 2008

The MCV pump is probaly shot, try changing the hydraulic filter first, most likely you need a new pump, good luck.

1206 IHC steering and hydrolic problem.

Anonymous-0

Well-known Member

MIKE FRENCH

Member

Similar threads