1939 farmall h alternator bracket

Anonymous-0 · May 26, 2008

I,ve heard of people going to 12 volts does anyone know of a alternator bracket that will work without cutting the hood. e-mail me at [email protected] thanks for your help jim

Janicholson · May 26, 2008

There are pictures on this sight of nice mounts.
The process includes turning the original mount upside down, then using a long bolt, and a piece of pipe to support the rear of the Alt. The top then clears the hood. Adjustment is quite tight, but definitely possible. A Nissan (Hitachi) Alternator from a mid 80s PU works well and is smaller. Good luck, JimN

Andy Motteberg · May 26, 2008

Here are some alternators that fit under the hood that I saw on this site. You can see more info about the installation by going to the Parts & Pieces photo gallery on the left and put "Farmall H Alternator" in the search box.

Allan in NE · May 27, 2008

12 volt generator off of a newer tractor will bolt right on there.

Allan

MN Scott · May 27, 2008

Here's an Hitachi Alternator I installed on my Super H. Fits like a glove under the hood. Not the best picture tho.

<a href="http://s41.photobucket.com/albums/e280/Scott1066/?action=view&current=HPIM0514Small.jpg" target="_blank">

HPIM0514Small.jpg" border="0" alt="Photobucket

</a>

TomH in PA · May 27, 2008

That"s what I came up with on my own, but it seemed like such a rigging job I didn"t want to suggest it. Has about 1/16" clearance on each side of the alternator and has been working fine for about five years now.

F-Dean · May 28, 2008

On an M, you can just flip the generator bracket and not have to change the belt. May work on a H also.

1939 farmall h alternator bracket

Anonymous-0

Well-known Member

Janicholson

Well-known Member

Andy Motteberg

Well-known Member

Allan in NE

Well-known Member

MN Scott

Well-known Member

TomH in PA

Well-known Member

F-Dean

Well-known Member

Similar threads