Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Farmall M PTO Shield Specifications

Welcome Guest, Log in or Register
Author 
Ret

09-28-2002 04:20:05




Report to Moderator

I need to buy a PTO Shield for my 1950 Farmall M. Does anyone know the specifications for this shield so I can be sure that I buy the right one?




[Log in to Reply]   [No Email]
Jeff

09-28-2002 20:09:43




Report to Moderator
 Re: Farmall M PTO Shield Specifications in reply to Ret, 09-28-2002 04:20:05  
HI Ret, I have one laying in my shed from my old (M) that I sold about ten years ago along with some other old M things if your interested i'll sell it to you at a fair price??? tell me what you think it's worth and lets talk.



[Log in to Reply]  [No Email]
CNKS

09-28-2002 19:11:28




Report to Moderator
 Re: Farmall M PTO Shield Specifications in reply to Ret, 09-28-2002 04:20:05  
Mike Bunck at Steel Wheel Ranch has them. Excellent service. 785-548-7437.



[Log in to Reply]  [No Email]
Haas

09-28-2002 05:34:13




Report to Moderator
 Re: Farmall M PTO Shield Specifications in reply to Ret, 09-28-2002 04:20:05  
The IH part number for the M PTO shield is 66424DCX.



[Log in to Reply]  [No Email]
Ret

09-28-2002 07:31:47




Report to Moderator
 Re: Re: Farmall M PTO Shield Specifications in reply to Haas, 09-28-2002 05:34:13  
Do you what the actual measurements are?



[Log in to Reply]  [No Email]
The Red With Picture and Specss

09-28-2002 08:00:21




Report to Moderator
 Re: Re: Re: Farmall M PTO Shield Specifications in reply to Ret, 09-28-2002 07:31:47  
Punch below for the picture. If it was exactly retangular, it is 7" high by 11" wide by 10.5" in length. The two major bends are 2" radius. The curves at the bottom of each side are 1" radius. The 3 "L" brackets are 1" by 4" by 1" wide. The holes are 3/8" radius on the brackets.

If you don't want to go to a lot of effort, LaVerne Meyer or Will Sick, who both advertise in YT classifieds, would probably have one in stock. Both gentlemen are reasonable in price.

[Log in to Reply]  [No Email]
The Red Again

09-28-2002 08:10:57




Report to Moderator
 Re: Re: Re: Re: Farmall M PTO Shield Specifications in reply to The Red With Picture and Specss, 09-28-2002 08:00:21  
Email addreses.

LaVerne Myer is chub@liljasper.com

Will Sick's addy is wills@fmctc.com



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy