I have a M I need to sell.It has a brand new saginaw 3 pt and a tsc 5ft bush hog type mower 1200.00 plus for those 2 items. THe M has just been all rewired (professionally) for 12 volt, new battery plugs distributor cap wires etc. Tires are real good with tubes and believe filled with calcium chloride or whatever it is you fill tires with.Starts in the middle of the worst weather like last winter. Does not leak a drop of fluid narrow front with wheel weights all around 3 total on rears singles on front with mud scrapers. Sheet metal is real good and solid all around. Rims aare all solid no rust anywhere. Aaam I nusts trying to get 3450.00 for this workhorse? Trannny and pto are excellant also clutch. thanks
Re: Re: Farmall M Am I nuts in reply to Dave T, 07-16-2001 18:58:21
To Dave T: You got a little too smart mouth about Jacks post. He didn't have a phone number or address etc. His post wasn't much different than other asking "what is such and such worth." We're all here to help. After all, Farmers like to debate value. Lighten up. This is an informal site with layed back friendly posts. Ralph
Re: Re: Farmall M Am I nuts in reply to Dave T, 07-16-2001 18:58:21
I am not trying to sell it here. Just wanted some realistic feedback as to price as that is jsut about what I have in it. If I wanted to sell it I would of posted it there or at leaset posted the vicinity of the country it was located in. You know what they say when you assume. thanks
Re: Re: Re: Farmall M Am I nuts in reply to jack, 07-16-2001 19:04:51
I'm sorry, it sure sounded like a sales pitch. I got $3500 for my 300 with a Saginaw hitch. The buyer was thrilled. He didn't expect to get that much tractor for the money....Dave
Re: Farmall M Am I nuts in reply to Jack, 07-16-2001 18:41:54
Jack, you aren't nuts, perhaps on the high side for an M but if someone is really wanting one and you have added all these new items...I don't think so..3450-1200=2250...you are really asking 2250 for an M with a new Saginaw 3 pt. hitch worth about $600..so$1650....Someone who wants the pair will not find that greatly out of line at least not in southern Ontario. Good luck from Mike in Exeter Ontario
Re: Re: Farmall M Am I nuts in reply to Michael Soldan, 07-16-2001 18:57:57
Michael, I missed something in your analysis. Jack said the mower and Saginaw 3 point were $1200. So 3450-1200=2250 for an M, not an M with a Saginaw. To me $2250 for an M whose paint condition is not mentioned is about $850 to high. For $2250 I would expect a recently restored M. And wear as I would be pleased to buy a "like new" Saginaw for the purchase price, a used TSC mower would be depreciated greatly. Dick
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Latest Ad:
John Deere wheels rare pair of A1106R 24 inch solid cast rear wheels 3000.00. Pair of BWH / BNH 40 inch spokes 1600.00 pair of John Deere D front spokes 350.00.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.