|
| |
My M is running again after 3 months
| Author |
|
|
jiM
06-22-2001 07:16:18
|
It's back and stronger than ever, I rebuilt the
motor from top to bottom. The head had 7 cracks and the valve seats were gone along with the intakes and to boot I had a blown head gasket and a broken piston skirt, and it would still run how
was that for a testment to a Farmall. thanks for all the help fellers.
|
|
|
|
JDM
06-22-2001 13:04:45
|
|
Re: My M is running again after 3 months in reply to jiM, 06-22-2001 07:16:18
|
|
| |
Now will you stay off of that Deere!GLad your up and running again!Olins coming for Daddys M week after next.Hey shoot me the guys name that you got your belt pulley from.Need to see if he has some parts for it.Later!John
|
|
|
|
The Red
06-22-2001 07:38:44
|
|
Re: My M is running again after 3 months in reply to jiM, 06-22-2001 07:16:18
|
|
| |
Congratulations there Jim. I bet she has a sweet bark! My technique is to retorque the head bolts, check valve lash and change oil and FILTER at 2 hours and around 30 hours.
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
Storing Your Tractor - by Staff. If your tractor is going to be stored for any length of time, a few precautionary measures are helpful in preserving various parts, also in avoiding future difficulty. Store tractor under cover. If impossible to place tractor under cover, be sure to cover air stack and exhaust pipe. Drain radiator and engine block. To avoid gum content collections, drain both fuel tanks and carburetor. Leave radiator and fuel caps slightly loose to protect gaskets. Block tractor up to remove weight from tires and to keep tires from contact with moist floor.
... [Read Article]
Latest Ad:
JENSEN miniature pump jack. 13W. Operating smoothly. 5 weights.
[More Ads]
Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
