Auction Link

TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

F20N Lives!!

Welcome Guest, Log in or Register

Author

Bill B

05-18-2001 18:02:23

Report to Moderator

third party image

Well, Red wanted to hear it bark, and if he were a thousand miles east, he could have heard it today. I got my new plugs and wires in the mail, and installed them, added some gas, and hitched a chain to the H. My geezer buddy Stanley was here, so he drove the H and I hopped on the F20N. I rigged a wire from the choke, and when he took off, I put it in third gear and let out the clutch, and a big bark and then a beautiful roar. It runs pretty good. I dont like to crank a machine I have not yet heard run, so we towed it. After I shut it down, I set the mag advance just off shutdown, and gave the crank a pull, and it started the first shot. I still have a few details to finish, but it runs, and I drove it! Another antique Farmall saved from the scrap heap.

Check out my other junk

[Log in to Reply] [No Email]

Paul Shuler

05-19-2001 15:44:12

Report to Moderator

Re: F20N Lives!! in reply to Bill B, 05-18-2001 18:02:23

All I can say is WOW!. It looks great. I know you must be very proud

[Log in to Reply] [No Email]

Bill B

05-19-2001 10:53:32

Report to Moderator

Re: F20N Lives!! in reply to Bill B, 05-18-2001 18:02:23

Thanks all, for the nice comments. I think I will load it on the trailer and take it to the show tomorrow.

[Log in to Reply] [No Email]

F20II :o)

05-19-2001 07:09:54

Report to Moderator

Re: F20N Lives!! in reply to Bill B, 05-18-2001 18:02:23

Wow, Bill you have sure done a very nice job!!!!! The purrrrr rr of that engine just has to make you chest stick out a mile or more :o) I have a number of tractors but my F20 is my tresure thats for sure :o) Thats one fine tractor :o) I commend you for saving another part of History it always good to see one escape the bone yard :o)

[Log in to Reply] [No Email]

The Red. CONGRATS!

05-19-2001 00:39:45

Report to Moderator

Re: F20N Lives!! in reply to Bill B, 05-18-2001 18:02:23

There Bill. She looks great!!

[Log in to Reply] [No Email]

Dave BN

05-18-2001 23:02:23

Report to Moderator

Re: F20N Lives!! in reply to Bill B, 05-18-2001 18:02:23

Looks grrrrr rreat. Is that exhaust factory?

[Log in to Reply] [No Email]

Farmer Bob

05-18-2001 21:10:11

Report to Moderator

Re: F20N Lives!! in reply to Bill B, 05-18-2001 18:02:23

Bill, She's a classic beauty!!! It's sure a wonderful feeling to hear them come back to life. Enjoy the heck out of her she's a keeper for sure!//FB

[Log in to Reply] [No Email]

Glenn(WV)

05-18-2001 19:41:50

Report to Moderator

Re: F20N Lives!! in reply to Bill B, 05-18-2001 18:02:23

Way to go, Bill!! It looks fabulous.

[Log in to Reply] [No Email]

Gene M

05-18-2001 19:28:55

Report to Moderator

Re: F20N Lives!! in reply to Bill B, 05-18-2001 18:02:23

A great looking machine!!!!! !! I spent a lot of time on a 39 I believe, cultivating, plowing, etc. Had the same cast rear wheels etc. Told Dad not to git rid of it. But---one day I went back to the farm--GONE!!!!! !!! Had sold it to the scrape metal dealer. Same with a 50 GMC pick-up,I called it a 5 window(had the curved windows at back of cab) The pickup survived, someone got ahold of it, do not know about the F20. Sure wish I had both of them--

[Log in to Reply] [No Email]

Bill C

05-18-2001 18:52:39

Report to Moderator

Re: F20N Lives!! in reply to Bill B, 05-18-2001 18:02:23

You did one heck of a job on her Bill,you should be proud!Glad to hear that she runs,have fun with it,you deserve it.

[Log in to Reply] [No Email]

Bob in Southwest Iowa

05-18-2001 18:31:12

Report to Moderator

Re: F20N Lives!! in reply to Bill B, 05-18-2001 18:02:23

Looks GREAT!!! You have given that tractor many good years to come. A tractor to be proud of for sure. Great job.

Bob

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy