fastfarmall

Well-known Member
Will 750 lbs of pressure lift a 3 furrow plow, a number 60, that's revved up,before the oil gets warm? 500Lbs at half throttle!
 
Ya really want between 950 and 1250 Hot . . But a 3x8 should lift it maybe a bit SLOW . The larger the cylinder the slower it will lift.
 
Sorry i forgot to add that, i got a 4 inch that isn't doing anything, but a 3.5 is what i like to use!!
 
No big hurry, but its to wet to try it here, other than in the yard, just dont want to go to the plow day, and then it wont lift, it would be embarrassing !!
 
sure it will lift, thats about all the old pto charlynn hydraulics put out . we used to have the old john deere cyl with the 3/16 john deere plow and it did the job on the W6. plus those cyl's were low psi rated so if you hooked about 1700 psi to it you would blow the side out. ask me how i know that. pretty sure it was a 3 CYL.
 
You wont be. Pump would have to be shot to not pick up a 3 bottom plow with a 4 inch cylinder. An M will lift a 12foot Oliver 252 disc with a 4 in. cylinder, and the speed with which it does it, looks to me like it could pick up substantially more.
It will lift it locked in the detent, so that tells us that its not outside the kickout pressure.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top