Drew McVicker
New User
This message is a reply to an archived post by Dustin Medders on April 18, 2014 at 10:24:27.
The original subject was "3414 Hydraulic pump".
HI, I have this same tractor/loader/backhoe. I read this post only after many struggles with finding the right pump for my tractor. I tried to use the info. from that post to find the pump on the suggested supply house. That pump didn't come up on my search so i ordered one that met the cu. in. and came up with 9-12243-A. so when i got it, i found the inlet port to much smaller. My tractor takes a JIC 20 fitting which is about 1 5/8 " dia. The new port looks like a 3/4 " dia. I can get a JIC fitting for that but i'm wondering if the pump will have enough flow being reduced that much? So i'm wondering what experience he had with his situation. the original pump was a cessna that was replaced by an TRW neither of which seem to exist or have replacement parts for.The person who responded to D Medders was J Demaris.
The original subject was "3414 Hydraulic pump".
HI, I have this same tractor/loader/backhoe. I read this post only after many struggles with finding the right pump for my tractor. I tried to use the info. from that post to find the pump on the suggested supply house. That pump didn't come up on my search so i ordered one that met the cu. in. and came up with 9-12243-A. so when i got it, i found the inlet port to much smaller. My tractor takes a JIC 20 fitting which is about 1 5/8 " dia. The new port looks like a 3/4 " dia. I can get a JIC fitting for that but i'm wondering if the pump will have enough flow being reduced that much? So i'm wondering what experience he had with his situation. the original pump was a cessna that was replaced by an TRW neither of which seem to exist or have replacement parts for.The person who responded to D Medders was J Demaris.