ChampagneNBeer
Member
Hi All,
Went to get a new fan belt for the M, uaing the following part numbers, which all seem to reference different sizes, yet all are #'s for the M:
16131DA
69490DA
45983D
All are about 45 1/2 inches long, with minimal difference.
Well, even with the adjuster completely open I cannot get a 45" belt on - it is too short.
Gave Carquest the 69490DA number and they gave me a Gates TR30467 (7/8" X 47.25").
I got it on, it is a little proud on the crank pulley and adjusted up okay - but being 47 inches, am worried with stretch the adjuster won't take up the slack in the future and/or it is already to proud.
Thoughts on using the above-referenced belt?
If this is a no-go, gonna go back to a standard v-belt and no more of this cogged belt hooey.
Thoughts?
Went to get a new fan belt for the M, uaing the following part numbers, which all seem to reference different sizes, yet all are #'s for the M:
16131DA
69490DA
45983D
All are about 45 1/2 inches long, with minimal difference.
Well, even with the adjuster completely open I cannot get a 45" belt on - it is too short.
Gave Carquest the 69490DA number and they gave me a Gates TR30467 (7/8" X 47.25").
I got it on, it is a little proud on the crank pulley and adjusted up okay - but being 47 inches, am worried with stretch the adjuster won't take up the slack in the future and/or it is already to proud.
Thoughts on using the above-referenced belt?
If this is a no-go, gonna go back to a standard v-belt and no more of this cogged belt hooey.
Thoughts?