Hello, new to the site but have learned a lot in the past.
I have a 49 H that has been sitting for a while. Got it fired up but couldn t get the loader to lift. After dropping the pump, reinstalling, I had a hard time getting the coupler between the countershaft and pump back on. It wasn t very smooth coming out either. I cleaned that up and got it spinning. The countershaft spins very slowly when not connected to the belly pump. It doesn t spin at all when connected to the belly pump.
Anyone know what would cause the counter shaft to not have much power? Is this something I can look into from that bottom housing or will I need to pull the cover off the transmission?
Any insight would be great.
I have a 49 H that has been sitting for a while. Got it fired up but couldn t get the loader to lift. After dropping the pump, reinstalling, I had a hard time getting the coupler between the countershaft and pump back on. It wasn t very smooth coming out either. I cleaned that up and got it spinning. The countershaft spins very slowly when not connected to the belly pump. It doesn t spin at all when connected to the belly pump.
Anyone know what would cause the counter shaft to not have much power? Is this something I can look into from that bottom housing or will I need to pull the cover off the transmission?
Any insight would be great.