International Cub Carb Question

Good Evening,
I was hoping somebody could help me with the correct part number for the carburetor off my 1976 International Cub. The only numbers I found were inside the top half. They are BR2-262. Says Bendix on one side and Zenith on the other. Another quick question: When I went into Race Brothers farm store today and asked for a carburetor kit for the above mentioned tractor the fellow wanted to know what model I had. It's not a Low Boy or 154 so what should I have told him? What is the model? Would it be a "Cub" model?

Thank You
mvphoto47195.jpg


mvphoto47196.jpg
 
IH had Farmall Cubs and International Cubs. The International Cub models that I am aware of were 154, 184 and 185. They all had non adjustable axles. I think all the Farmall Cubs could be adjusted for wheel
base width. If you could post a picture would be great.
 
Earlier Cub carburetors have the externally accessible main jet (the 3/8" brass hex on the side of the carb).

Cub tractors 312390 and above. See CASEIH.
CASEIH
 
It's a International Harvester C60 . In your first picture the tag is right behind the steering box , C 60 is the engine model ..
 
Thank you Mike and others for taking the time to read and answer my questions. Maybe someday I can answer a few for other folks. Mike you have been a great help.

Matt
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top