HM-250 Hydraulic Cylinder Mount

Friday I bought myself an HM-250 cultivator for my H. I believe the only things missing are the cylinder mounts that bolt to the frame rails.

Does anyone have a pair sitting around they would want to get rid of?

If I can't find a pair to purchase I will fab them up. Based on some rough measurements off Facebook I sketched up what needs made. Can anyone confirm these
dimensions to what they have on their tractor?

Thanks!
cvphoto113.jpg


cvphoto114.jpg


cvphoto115.jpg


cvphoto116.jpg


cvphoto117.jpg


cvphoto118.png
 
The plates should have a step and there is 3 mounting holes in them depending on whether they are on h or m tractor. You also need the back anchor plate to hold the bolts and the L plate to hold cylinders when mounting. I sold a few extra sets of mine last year so i cant help with supplying any...
 
Nice mounts you got lucky and they still have the original factory clips. Those plates are also used to mount cylinders for the HM220-222, HM277-280 planters as well.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top