New clutch and brake shaft 560

Pine Trees · Oct 5, 2019

I am installing a new clutch and brake shaft on a Farmall 560. I plan on putting in new seals at the same time. Is there an easy way to remove the old seals?

kevinj54 · Oct 5, 2019

(quoted from post at 18:32:35 10/05/19) I am installing a new clutch and brake shaft on a Farmall 560. I plan on putting in new seals at the same time. Is there an easy way to remove the old seals?

Pry them out.

rustred · Oct 5, 2019

if your replacing the shaft you have the problem half beat already, and new seals is a must. just pop them out. replacing the seals with shaft in is more of a challenge.

Pine Trees · Oct 5, 2019

Thanks. I'd tried prying just had not given enough pressure. They popped right out. Any idea on where to get a new brass bushing for the foot clutch lever.

rustred · Oct 6, 2019

I have heard that the piston wrist pin bushing from the 282 engine in your 560 works for that. take to machine shop and they will fit it. there is no bushing in there so it must be reamed and fitted.

New clutch and brake shaft 560

Pine Trees

Member

kevinj54

Well-known Member

rustred

Well-known Member

Pine Trees

Member

rustred

Well-known Member

Similar threads