IH 584 bleeder skrew, specifications?

metsata

New User
Hello,

I bleeded brakes, and as a novice I broke the bleed valve, or bleeder skrew. Do anybody know specifications for the skrew? I found a website that sells quite a lot bleeder skrews, I quess it to be something like: 7/16'' x 20NF?

Ok, I have one unbroken skrew in other side, but how to measure it?

Br,
Tapio
 
Just take the old one to an auto parts store and let them size it up. Being a 584 it could be metric or SAE for the treads
 
It appears both the US and Euro versions use the same brake bleeder screw, 3068777R1, replaced by 82301R1.

Thread is 3/8"-24 TPI.

Don't know where you are at, in the US many autoparts stores sell "Dorman" parts, and Dorman Part # 6858 is a direct replacement.
 
It is not an inch bolt just snug will due for tight. They have a screw driver slot if you are afraid of over tightening with a wrench.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top