I have developed a missing problem mowing yesterday after about an hour.I just put a new coil on
when the old tested bad.The tractor got to where it would'nt start so I checked everything with
tester light.I wonder if this coil is too hot.The Lady at the parts store asked me if it had an
external resistor,which it does.and has been converted to 12 volt.This evening I mowed about 5 to 10
minutes and it did not miss.When I shut it off the coil felt very warm.I don't know much about coils
but after I put it on the ampmeter went all the way to the right or plus side and jumped back and
forth a little while then settled but still not centered.Can anyone tell what could cause
this.Thanks for any help.
Charlie
when the old tested bad.The tractor got to where it would'nt start so I checked everything with
tester light.I wonder if this coil is too hot.The Lady at the parts store asked me if it had an
external resistor,which it does.and has been converted to 12 volt.This evening I mowed about 5 to 10
minutes and it did not miss.When I shut it off the coil felt very warm.I don't know much about coils
but after I put it on the ampmeter went all the way to the right or plus side and jumped back and
forth a little while then settled but still not centered.Can anyone tell what could cause
this.Thanks for any help.
Charlie