I am looking to set aside some time to do an in frame rebuild on my 1940 A. I have few questions.
1-Can I order the kit before hand if I am changing sleeves pistons etc?
2-I am looking at this kit..."Basic In-Frame Engine Kit, with Stepped Head Pistons Part Number BIFH1154"
3-Should I change all the valves and springs at the same time or can I do that at another date. They just are slightly pitted on top but are ok.
If there is procedure to follow before doing this I would like to have it in place and read over a few times. Any advice will be helpful.
Finally, I figuring taking off for 2 days to do this.
Sal
1-Can I order the kit before hand if I am changing sleeves pistons etc?
2-I am looking at this kit..."Basic In-Frame Engine Kit, with Stepped Head Pistons Part Number BIFH1154"
3-Should I change all the valves and springs at the same time or can I do that at another date. They just are slightly pitted on top but are ok.
If there is procedure to follow before doing this I would like to have it in place and read over a few times. Any advice will be helpful.
Finally, I figuring taking off for 2 days to do this.
Sal