Farmall 400 studs

chochy7410 · Jun 6, 2019

On the left side of the gas engine is a water jacket cover. It is held on by bolts and studs with a nut on them. I need those studs. They are 5/16 I think with fine thread on one side and coarse on the other. I went to the local dealer and they are not available and no lenghts were listed to try and find them somewhere else. Any help would be appreciated. thanks

ih560 · Jun 6, 2019

(quoted from post at 22:02:15 06/06/19) On the left side of the gas engine is a water jacket cover. It is held on by bolts and studs with a nut on them. I need those studs. They are 5/16 I think with fine thread on one side and coarse on the other. I went to the local dealer and they are not available and no lenghts were listed to try and find them somewhere else. Any help would be appreciated. thanks

Those are common studs. The last ones I bought came from autozone I believe, they were labeled as carb mounting studs in a pack of 4. You can also get them individually as dorman #675-096 .

DeltaRed · Jun 6, 2019

you can get em at napa.

chochy7410 · Jun 11, 2019

Do you know the part number or what to ask for? Thanks

jhncp · Jun 23, 2019

Just use regular 5/16 bolts. I don't think u
will hurt the tractors feelings

Farmall 400 studs

chochy7410

New User

ih560

Member

DeltaRed

Well-known Member

chochy7410

New User

jhncp

Member

Similar threads