Farmall MD fuel tank lines.

lbg57

Member
Does anyone know where I could purchase a set of correct MD fuel tank supply & return lines?
I tried Precision Tractor Parts but they only have a set for the "B" style injection pump. I have the "A" style pump.
They said that they had a couple people offer to lend them their set of original lines to copy them, but to date nobody has bothered to follow through. Sure would be nice for the rest of us if they would.
What is left of the ones on our MD are only short stubs on both ends and rubber hose in between them.
As a last resort I will have to try and fab a set from steel brake line and hope it looks somewhat presentable.
On that note are the line fittings just a standard brass nut and ferrule? Any thoughts on this would be greatly appreciated. Thanks.
 
The MD lines used a nut with a fitting that was sweat fitted to pipe. I don't know what they were
actually classified as but definetely not a ferrule style. Later models, I think like 450 went to a
nut with ferrule attached to nut like the gasoline engines, only larger of course. They were a lot
simpler to work with.
 
When i have time to get my super md moved
to the shop, and pull the lines off of it
they are going to Precision. Working 60
plus hours a week and trying to get things
done at home doesnt leave much time for
other things...
 
Type A pump, mine has a good set of
original lines that havent been bent up and
still have the line clamp that goes under
air filter between the primary and return
lines. Myself and another guy sent in the
battery hold down brackets for the under
seat battery boxes so Precision had pattern
for both gas and diesel brackets. I am also
working with him to eventually get a exact
copy of the original battery box for the
supers back in production not the chinese
steiner crap that everyone sells and dont
fit right. Again things like this take
time, and i will have a tractor setting
here taking up space while the lines are
off of it...
 
All states ag parts. They have multiple
locations so one should have them. If not
would a wd6,wd9 or 400-450D be close?
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top