Hey guys I?ve been restoring a 45 H ( going on
about 9 years now), anyway right now it?s time to
fire it up been looking forward to this after this
project took so long. Everything seems to be good;
got gas flowing, spark, timing etc, won?t fire, finally
checked compression, I?m getting steady 60 psi in
all cylinders. I readjust valves twice to double check
set at .017. No rear wheels on at this time so I can?t
pull start to try that. I am checking compression with
a with a battery cranking, any suggestions please .
All parts bought from reputable company ( full
engine kit) valves/ seats and crank all done by
reputable machine shop. Thanks in advance, Dan
about 9 years now), anyway right now it?s time to
fire it up been looking forward to this after this
project took so long. Everything seems to be good;
got gas flowing, spark, timing etc, won?t fire, finally
checked compression, I?m getting steady 60 psi in
all cylinders. I readjust valves twice to double check
set at .017. No rear wheels on at this time so I can?t
pull start to try that. I am checking compression with
a with a battery cranking, any suggestions please .
All parts bought from reputable company ( full
engine kit) valves/ seats and crank all done by
reputable machine shop. Thanks in advance, Dan