Distributor

robertw

Member
I was wondering if the 300 through 450 is a direct bolt on a 1951 12 volt farmall m Mr Slater answered it can work like maybe there is something else that has to be done i just wanted to make sure before i buy one i want the 22 maybe 25 degrees as i pull this tractor on the transfer sled in the heaver class and need a little more power on a hard track sometimes i just didn't know how to take that it can work.

Sure like this web site to the guys who put it on here THANKS.

As usual THANKS for any help.

Robertw
 
Yes those distributors will look just like one for a 51 M. Only difference is the total advance and a little different advance curve than a original M distributor. Will bolt on, just use the coil, or coil and resister that you use now. Think I showed you the codes for a 300 and 350 distributor and where to look in another post. 400 and 450 25 degree advance ones have a N code.
 
You did show me in a another post and today post you answered my question so i'm all set now.

Thanks D Slater.
Robertw
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top