International 424 hydraulic

Farmall1820 · May 15, 2019

How much hydraulic fluid you put in it and how do you know when it?s full is there a plug somewhere or someone tell me cause I?m new to it.

JimB2 · May 15, 2019

Hi, does your 424 have a loader with front pump? If so see the link 444 Loader Front Pump.
If no loader then there is a pipe plug behind the seat on top of hydraulic housing just above top link, remove pipe plug and look in the hole, you should see a shelf in there and correct fluid level is when the shelf is covered. Use CIH Hytran or equivalent hydraulic oil.
444 Loader Front pump

warren woodrow · May 15, 2019

(quoted from post at 07:24:06 05/15/19) Hi, does your 424 have a loader with front pump? If so see the link 444 Loader Front Pump.
If no loader then there is a pipe plug behind the seat on top of hydraulic housing just above top link, remove pipe plug and look in the hole, you should see a shelf in there and correct fluid level is when the shelf is covered. Use CIH Hytran or equivalent hydraulic oil.
444 Loader Front pump

And do not confuse what is meant by a " front pump " The pump mounted on the front right hand side [ passenger ] side beside the governor is NOT a front pump . Confusion about this has caused me and many others to drastically overfill the transmission . I realize the question was about hydraulic fluid rather than transmission fluid but since there are two separate systems on this tractor it can be confusing . Transmission and hydraulic fluid are separate on the 424 .

International 424 hydraulic

Farmall1820

Member

JimB2

Well-known Member

warren woodrow

Member

Similar threads