340 tin

Gary Mitchell · May 7, 2019

Seems to be a lot of tin missing in the area shown on my "new" 340. Question is, are there 3 or four pieces gone or just one big on? Thanks, gm

old · May 7, 2019

I would have to walk to the field where the 340 is parks to be able to answer your question but I could maybe here in a bit

Gary Mitchell · May 7, 2019

Old, I wouldn't happen to be a parts tractor?

gm

old · May 7, 2019

Sorry no not a parts tractor but it is a complete other then some side sheet metal. I'm pretty sure the guy who owns it would sell it

WESnIL · May 7, 2019

You are missing four pieces. For the 'white' pieces you have the corners, 369274R1 Skirt, instrument panel housing RH corner, and 369273R1 Skirt, instrument panel housing LH corner. If a gas tractor you need the center piece, 369275R11 Skirt assembly, instrument panel housing rear (carbureted engine tractors), or 369851R11 Skirt assembly, (Instrument panel housing rear diesel engine tractors). The glow plug meter would also be needed for the diesel tractors. For the 'red' pieces you need 369276R11 Cover assembly, LH valve housing, 369277R11 Cover assembly, RH valve housing, and 369816R2 Valve housing front. These last three pieces will cover the hydraulic valve assemblies. See picture of a 340 diesel tractor. Hope this helps.

pinball · May 7, 2019

farmall or internatonal

Gary Mitchell · May 8, 2019

Old, lol, thanks for looking. I already probably have one more than I need. gm

Gary Mitchell · May 8, 2019

Thanks Wes. gm

340 tin

Gary Mitchell

Well-known Member

old

Well-known Member

Gary Mitchell

Well-known Member

old

Well-known Member

WESnIL

Member

pinball

Well-known Member

Gary Mitchell

Well-known Member

Gary Mitchell

Well-known Member

Similar threads