After raising my attention about failure of axle clamps for hitches. Any pics of strengthening them would be nice. Any pics of attaching 3 pt to drawbar to belly be nice to.
Considering adding 2nd set of brackets.
- or strengthening existing ones.
- adding braces to belly mount for drawbar to reduce torque
- doubling angle iron on each side where mounts go
- doubling thickness of arms
- to a complete rebuild.
Any ideas or what you have done be great.
Considering adding 2nd set of brackets.
- or strengthening existing ones.
- adding braces to belly mount for drawbar to reduce torque
- doubling angle iron on each side where mounts go
- doubling thickness of arms
- to a complete rebuild.
Any ideas or what you have done be great.