Identifying a Super A Hydraulic Pump for O-Rings and Gaskets

1948 Super A. Can t seem to find the kit online. Here s some images of the pump. Thanks in advance
mvphoto35415.jpg


mvphoto35416.jpg


mvphoto35417.jpg
 
there aint no kit just get the o-ring or the seal which ever your pump uses. If the journal is worn where the seal goes you will need a speedy sleeve or the new seal or o-ring will not stop the leak
 
This kit says it is a direct replacement for 355207R91

IHS3506
Replacement Number
354405R92
355207R91
355405R91
355405R93
360691R91
 
I tried to post a link to the rebuild kit on this site and it blocked it. https://www.yesterdaystractors.com/Farmall-C_Hydraulic-Pump-Kit_354405R92.html
 
Per your first pic, you do not have the complete pump off the engine yet but you have the bolts out. Your seal problem is on the other end of the shaft/gear you see in the picture. Could be an o ring or a lip seal. Once the rest of the pump is removed, then remove the gear, then the shaft and you will see the seal. Like already mentioned, the shaft could have a groove worn in it from the seal/oring.
Dennis
 
the thing is , just take the o rings with you to a brg. and seal shop and they measure them and hand them to you. very easy. plus be cheaper.
 
There is nowhere I can go locally and get every one of the seals used in that pump, and get them handed to me the same day, and definitely not cheaper than I can buy the entire kit online.
When I try to go into a fastener store to get a fairly typical stud they tell me they can order it and have it in a couple of days. I can order it online myself, have it in 2 days and be half the cost they are going to charge me, and then places wonder why people buy online.

I would love to be able to buy everything locally to support the local businesses, but they never have what I need on-hand and I would have to wait 2+ days to get it, plus trying to find the time to get there and pick it up before they close and STILL pay more for it from them.
 
(quoted from post at 01:45:50 05/04/19) they sell the kits right here on this site
Yep, I put the link to it in my post half way up this page.
https://www.yesterdaystractors.com/Farmall-C_Hydraulic-Pump-Kit_354405R92.html
When I tried to make it an actual link it blocked my whole post, so I just pasted the address.
 
Thanks for the help. I just ordered the kit, hopefully it s here pretty quick so I can get going on this project. Also, thanks for the rebuild kit link. That ll be a huge help.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top