Farmall F12 Special Parts

One of my interests on F12 tractors, and indeed other Farmalls, is in the special parts offered. Some seem relatively common, while others are very few and far between. If anyone has photographs of F12, or Regular, F20 and F30 Special Attachments, they would be wonderful to see.
First two pictures are the F12 foot brake pedal stop for tractors without belt pulley shield.
Third picture is of the set up for foot lever for use with, 25, 25V and 27V mowers (GL25V, GL25VO in Australia). I have nearly all the parts for this; still looking for the foot lever bracket for F12 (M 42077).
Fourth picture shows Delco-Remy generator setup for gasoline (petrol) F12 tractors.
SadFarmall

mvphoto33310.jpg


mvphoto33311.jpg


mvphoto33312.jpg

mvphoto33314.jpg
 
That's a great interest. I have an F14 and I try to find implements made for those tractors. So far I have a mowing machine, cultivators and a hydraulic lift plow.
 
Charlie,I have a mounted 2 row corn planter for an F12. Bolts to the axle and uses the power lift. A chain goes from the axle to 'power' it.I would sell it. Steve.nine7o-4I7-!I78 Western Colorado.
 
I have a "Lite" crankshaft for a F-12. Most of these early F-12 crankshafts were replaced by IHC dealers. Anyone interested in this "Special Part?"
 
We have a mounted corn picker sitting in the brush for the last 50 (or is it 60) years. It was complete but I'm sure rust and nature have gotten to it. I have never seen it mounted or the f 12 run in my lifetime.

Karl f
 
A couple more for F12:
Power Take Off Shield Part Number C 33505
Headlamp, made by Guide and headlamp bracket from Dwayne Hansford at Rustic Red Acres:

mvphoto33328.jpg


mvphoto33329.jpg


mvphoto33330.jpg


mvphoto33331.jpg

SadFarmall
 
Here is a special attachment, which would be very useful for pto work. Power Take Off Lever Extension and Rod.
Has anyone seen one?
mvphoto33352.jpg

SadFarmall
 
Thank you! Sorry for long delay in replying; one second inattention on a motorbike heading home from our sheep yards resulted in a low-speed, but painful accident. Dislocated shoulder and ligament damage. Getting better now with titanium buttons in there to hold it together.

The picture is wonderful! Overdrive as well! I see also rubber tyres on wheels with wheel weights. Bushes to raise the seat - are they are IH part or fitment by an owner? Brake lever extension. Also a gear for driving a machine from the off-side drive axle and a petrol / kerosene tank. No kerosene manifold heat lever fitted…

Thank you! Excellent photograph!
SadFarmall
 
Sadfarmall,

I think you saw most of the neat bits on the tractor. The bushings to raise the seat are just a stack of washers that my grandpa put in there. The sprocket on the axle is to run the f-110 mounted planter. The weights are the F&H weights. It was originally a Kerosene tractor, but now is gasoline, so they removed the lever. My grandpa also had the clutch pedal cut and re-welded to bring it closer--he was on the shorter side.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top