Re: IH444 Bull Pinion Shaft Seal

MJ in the UK · Mar 2, 2019

Thanks for the tip, I do a lot of those and never thought of doing it like that. I
allways put engine oil in the Hydraulic reservior. MJ

JimB2 · Mar 2, 2019

Hi, I see your 444 is painted yellow indicating possibly an industrial model. Some of the industrial models had Hytran in both the
hydraulic reservoir and the trans/diff. The trans/diff was used as an extra capacity hydraulic reservoir if there was a back hoe
and an auxiliary hydraulic pump connected to the crankshaft on the front of the tractor.

Kerplooey · Mar 6, 2019

Hey, MJ. Something I just got to thinking about; I dont recall anything in the manual stating to apply any kind of sealant or RTV to the bolt threads for the bearing carrier. Do the bolts themselves make the seal in the case, or should there be something applied to them?

Re: IH444 Bull Pinion Shaft Seal

MJ in the UK

Member

JimB2

Well-known Member

Kerplooey

Member

Similar threads