E4A Magneto armature disassembly

TheFarmallMan82 · Jan 20, 2019

Hello everyone! I have recently gotten my Farmall Regular running again this past July and to do that I have been using a good F4 mag a friend gave me to use for a little while. Now I have been working to get some spark out of my E4A mag and have been successful! The problem is when I was putting it back together I ended up snapping the long nut that connects the points to the armature. It snapped way far into the armature and now I cannot get it out. I do however have another used armature. Is it possible to swap the good coil and condenser into my other armature?? How can I get these things apart??!!

Thanks for the help!

Ben Olsufka

Bob · Jan 20, 2019

You can view or print the pages that cover your mag from the offical IH Blue Ribbon Magneto Manual at the link below:

http://farmallcub.com/rudi_cub/www.cleancomputes.com/Cub/Blue%20Ribbon%20Service%20Manuals/GSS-5035%20Service%20Manual%20Magnetos/index.html
GSS 5035

TheFarmallMan82 · Jan 20, 2019

Bob,

That manual really helped! I was able to get the armatures apart and I now have a working mag with a hell of a lot of good blue spark!!

Thanks so much!

Ben

E4A Magneto armature disassembly

TheFarmallMan82

Member

Bob

Well-known Member

TheFarmallMan82

Member

Similar threads