(800) 853-2651
SHOP NOW

Farmall M 6 inch stroker

R

Rwachter13

New User
Wanting to put a 6 inch stoker crank in my farmall m. Was wondering if it will work with no grinding and if I am able to use stock rods? Will I be able to use flat top or high dome pistons or will I have to have custom pistons made? How much would it cost to get a 6 inch stroker crank made? And finally how much hp would I gain by doing this?
 
Oh about 80 horsepower, but you will eventually break the web out of the center main bearing,i wouldn't do that, it doesn't prove nothing!
 
In Australia the powerful version was the Super AMD, which had a 264 cubic inch direct injection diesel engine. Same motor in the AW-7 Diesel, which pulled an IH 14 disc plough in hard Australian soil. Probably not many of that motor in the USA I guess.
SadFarmall
 
You will have to do some block clearance
and some clearance work on the cam. You
can use stock rods with a custom piston.
The piston design will depend on head CC
and compression that you want. I would
guess it might get to 80-85 hp. Crank 1500-
2000$. You will probably still be
underpowered depending on the level of
competition in your area.
 
You must log in or register to reply here.

Similar threads

W
Farmall m 5th gear
2
Replies
22
Views
1K
Janicholson
Janicholson
D
Need for ballast Resistor in 12V conversion
Replies
11
Views
765
Pete in Holland MI
P
D
Farmall M Wide Front Swap
Replies
7
Views
625
Midway
M
grandpa Love
M rings
Replies
17
Views
465
teddy52food
T
M
Farmall C-264 to C-267 Engine Upgrade (Super M-TA)
Replies
8
Views
1K
the tractor vet
T
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top