140 touch control issue

I have looks like I have a touch control issue, and I can not find a specific topic anywhere, so here goes. When the inside hydraulic lever is pushed into the raised position as soon as the rockshaft reaches the top it starts down by itself both rockshaft and lever when it reaches the bottom it stops and kicks out the pump as it should.
 
I'm not familiar with a 140 but on my Super C each lever has a friction material and as it wears a lever won't stay put, think it might take a 5/8s wrench or two to snug it up a hair.
 
You can buy a touch control manual. I have one. I don't understand all that's in it... but I have it.

Dave
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top