|
| |
| Farmall & IHC Tractors Discussion Forum |
261 cultivators
| Author |
[Modern View] |
|
bass
12-16-2018 18:31:20
|
any one out there got good detailed photos of how the 261 cultivators mounts up to the tractor. i got a set of 261s this weekend and gonna have to fab up some mounting hardware.
just looking for some detail photos of how they mount.
thanks
bass
|
|
|
|
bass
12-18-2018 03:24:37
|
|
Re: 261 cultivators in reply to bass, 12-16-2018 18:31:20
|
|
| |
i'll try to get some photos of what i'm looking at, and what ive got in mind to make the parts
bass
|
|
|
|
Lucid
12-17-2018 06:01:24
|
|
Re: 261 cultivators in reply to bass, 12-16-2018 18:31:20
|
|
| |
Is this what you are looking for?
|
|
|
|
FastFarmall
12-17-2018 14:35:05
|
|
Re: 261 cultivators in reply to Lucid, 12-17-2018 06:01:24
|
|
| |
I think he's looking for the [2] pieces, that bolt on the front, outside, of the bolster on a IHC tractor. There kind of triangle shaped, 1/4 thick 8 1/4 inches high and 16 1/4 inches long, the small part of triangle is about 3 inches. They attach with 3 - 5/8 bolts, but they have to be punched out for the 4 bolts that do hold the bolster, to the channel iron frame. The eye bolts are attached to the front of said piece, the top two pivot down, the bottom two pivot up into their respective slots, and hold the cultivator on !! Am i right bass ?
|
|
|
|
bass
12-17-2018 05:03:31
|
|
Re: 261 cultivators in reply to bass, 12-16-2018 18:31:20
|
|
| |
300 row crop
im going to have to fab up the eye bolts and frame hooks
|
|
|
|
gene bender
12-17-2018 05:44:23
|
|
Re: 261 cultivators in reply to bass, 12-17-2018 05:03:31
|
|
| |
Yes and they cut the frame mounts on the cult to fit the brackets on the tractor caure your tractor frame is like an M correct
|
|
|
|
gene bender
12-17-2018 02:52:57
|
|
Re: 261 cultivators in reply to bass, 12-16-2018 18:31:20
|
|
| |
What tractor. You will need to make some brackets depending on what is on the cult now.There was a bracket that bolted to the frame on older tractors then cult was modified so what do you have now.
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
... [Read Article]
Latest Ad:
I NEED A PC160 FOR JOHN DEERE 100 DISC LET ME KNOW WHAT YOU HAVE
[More Ads]
Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
