What size belt for m -belt broke

Graveyard1984 · Dec 13, 2018

The belt from crank to the water pump broke on my m farmall. What belt dimensions is this belt?

Thanks

DeltaRed · Dec 13, 2018

Don't know the size or number.But I can go to NAPA,tell them I have an M,need a fan belt. They can look it up and supply me a belt.Also,take the old broken belt in as a sample.Go see your IH dealer,Stieners,or even these guys(YT) will have a belt listed.You can look it up.

Janicholson · Dec 13, 2018

Delta is correct. You need to put PB Blaster or your favorite juice on the fan hub movable pulley half threads now, the sooner the better. (I might go out at night and make the first application!! They can be nasty. After several drenchings, use a propane torch and heat the paint off of it (not acetylene) Then remove the set screw and use a brass drift to punch back and forth on the lugs that stick out to convince it to start moving. Be gentle, they break. Jim

jim warehime · Dec 14, 2018

This is where a parts catalog is very useful, you get the ih number out of said parts catalog go into napa give them said number and bam they hand you the belt.

IH part number is a 16131DA which crosses to Gates TR28454.

BarnyardEngineering · Dec 14, 2018

BTW, it's not a standard dimension belt.

What size belt for m -belt broke

Graveyard1984

Member

DeltaRed

Well-known Member

Janicholson

Well-known Member

jim warehime

Member

BarnyardEngineering

Well-known Member

Similar threads