wildbillsfarmalls
New User
Hi, would someone have a diagram picture of the head bolt torque sequence for a Farmall B Tractor. Any help would be very appreciated. Thanks. Bill
- Thread starter wildbillsfarmalls
- Start date
Hi, would someone have a diagram picture of the head bolt torque sequence for a Farmall B Tractor. Any help would be very appreciated. Thanks. Bill
rustybronco
Member
No diagram but start with the middle stud on the side closest to the spark plugs then to either one of the center studs on the opposite side. Next is the other center most stud on the same side. After those three would be the stud diagonally outwards across from the last stud and so on and so forth. What you are attempting to do is start from the center and work your way to the outermost studs evenly and in an X pattern outwards. Torque the in three stages, 40, 60 and 80 Ft Lb's.
Did you seal the head gasket with copper sealer or aluminum spray paint? Rockauto has the fel-pro head set (HS7732S) for $7.03 plus shipping
Did you seal the head gasket with copper sealer or aluminum spray paint? Rockauto has the fel-pro head set (HS7732S) for $7.03 plus shipping
rustybronco
Member
Correction... $17.03 plus shipping.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy