Welcome! Please use the navigational links on your left to explore our website.

Company Logo Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
Classified Ads
Photo Ads
Tractor Parts

Discussion Forums
Project Journals
Your Stories
Show & Pull Guide
Events Calendar
Hauling Schedule

Tractor Photos
Implement Photos
Vintage Photos
Help Identify
Parts & Pieces
Stuck & Troubled
Vintage Ads
Community Album
Photo Ad Archives

Research & Info
Tractor Registry
Tip of the Day
Safety Cartoons
Tractor Values
Serial Numbers
Tune-Up Guide
Paint Codes
List Prices
Production Nbrs
Tune-Up Specs
Torque Values
3-Point Specs

Tractor Games
Just For Kids
Virtual Show
Museum Guide
Memorial Page
Feedback Form

Yesterday's Tractors Facebook Page

Related Sites
Tractor Shed
Ford 8N/9N Club
Kountry Life
Farmall & IHC Tractors Discussion Forum

46 Baler update

Welcome Guest, Log in or Register
Author  [Modern View]
Case e

09-10-2018 19:35:53

Report to Moderator

third party image

third party image

third party image

First of all thanks for the help and insight, I have passed it onto my son. I was at a tractor show this weekend and found him a manual and he was very excited! Here are a couple of pictures so far.

The first picture is of the mower he brought back to life, the second is the manual I found him and the third is the picture he sent me tonight of his raking job and the rake he revived. Most of this equipment had probably not been used in 25 plus years. I told him he has earned an A+ so far. Next challenge will be the baler.....he has been greasing, oiling and studying, pretty big accomplishment for a kid and something to be proud of. He was upset that he had broke the pitman stick when he was mowing. I told him to remember it was 25 years old and if he didnt break one once in a while he wasnt doing anything. He found a universal stick and make that work...again pretty proud of that kid. I told him to take lots of pictures baling and hope to share those later. He has Wednesday off of work and college so plans to bale then.

[Log in to Reply]   [No Email]
John T

09-12-2018 04:05:38

Report to Moderator
 Re: 46 Baler update in reply to Case e, 09-10-2018 19:35:53  
Way back in the early seventies I bought a used IHC 46 baler at an auction and was trying to use it but it refused to tie correctly so I was riding on back (90 degrees hot n dusty) trying to hand tie and repair/rig it as the wife was driving. An older neighbor came past and remarked THEM DARN BALERS WOULDNT TIE WHEN THEY WERE NEW I HAD ONE LOL

Oh well such were the joys and hardships of a young farmer first operating on a shoestring budget grrrrrrrrrr

Best wishes and good luck

Older n wiser now John T

[Log in to Reply]  [No Email]

09-11-2018 07:10:57

Report to Moderator
 Re: 46 Baler update in reply to Case e, 09-10-2018 19:35:53  
Case e, where abouts is your son living?

[Log in to Reply]  [No Email]
case e

09-11-2018 10:11:24

Report to Moderator
 Re: 46 Baler update in reply to tomturkey, 09-11-2018 07:10:57  
Ames but this is near boone iowa

[Log in to Reply]  [No Email]

09-11-2018 06:27:41

Report to Moderator
 Re: 46 Baler update in reply to Case e, 09-10-2018 19:35:53  
My G'pa bought one of those rakes new & it had the flat---detatchable link---
chain for the drive. Found another one at a sale with the roller chain drive.

Flat chain was 72 1/2 chain which the dealer said was
no longer avail.
Found some at a chain dealer on the bay.

[Log in to Reply]  [No Email]

09-10-2018 21:51:01

Report to Moderator
 Re: 46 Baler update in reply to Case e, 09-10-2018 19:35:53  
That looks like an IHC Number 5 Side Delivery Rake built from 1952 to 1960. Nice to know there are young men still interested in these machines. If you need a parts list and diagrams for that rake, I have scanned a copy from my catalog.


[Log in to Reply]  [No Email]
case e

09-11-2018 11:30:53

Report to Moderator
 Re: 46 Baler update in reply to SadFarmall, 09-10-2018 21:51:01  
I appreciate that. He said there wasnt much in getting it going. Luckily all the equipment was under a roof. His next project is a vermeer round baler.

[Log in to Reply]  [No Email]
gene bender

09-11-2018 01:50:15

Report to Moderator
 Re: 46 Baler update in reply to Case e, 09-10-2018 19:35:53  
why such large windrows

[Log in to Reply]  [No Email]
case e

09-11-2018 05:21:26

Report to Moderator
 Re: 46 Baler update in reply to gene bender, 09-11-2018 01:50:15  
I would say they are more fluffy than big. Brome hay and one pass each side

[Log in to Reply]  [No Email]
Case e

09-10-2018 19:37:31

Report to Moderator
 Re: 46 Baler update in reply to Case e, 09-10-2018 19:35:53  
Anybody know what kind or module of rake this is. I had a few IH rake teeth laying around that fit it but never looked too closely at it.

[Log in to Reply]  [No Email]

09-11-2018 06:20:20

Report to Moderator
 Re: 46 Baler update in reply to Case e, 09-10-2018 19:37:31  
That is an odball when it comes to the teeth. Only model that used that particular tooth. Yes still avaible new. Earlier ones had flat chain drive, later a roller chain.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Today's Featured Article - Product Review - by Staff. When we finally checked out the 3000 PSI North Star, the whole story chaned. This unit was equipped with an 11 HP Honda engine with fuel shutoff, adjustable flow and optional syphon degreaser dispenser. It didn't have a pressure release or electric start to facilitate easy starting but according to the instructions, simply pulling on the trigger while cranking was sufficient. This method of starting proved more than adequate and kept the cost down on the unit. It had all the important ... [Read Article]

Latest Ad: 1967 Ford 3000 [More Ads]

Copyright © 1997-2021 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy