|
| |
| Farmall & IHC Tractors Discussion Forum |
C301 parts
| Author |
[Modern View] |
|
Feverpuller
06-23-2018 23:43:10
|
ISO A upright exhaust manifold to fit a C-301 and a oil pan. Need them to fit a 560. Thanks
|
|
|
|
ejr-Ia.
06-25-2018 15:16:56
|
|
Re: C301 parts in reply to Feverpuller, 06-23-2018 23:43:10
|
|
| |
I used a 806 gas 301 exhaust manifold went to a exhaust shop and made a pipe with a perfect double bend and came out the original hole it is straight though.
|
|
|
|
Owen Aaland
06-25-2018 13:46:39
|
|
Re: C301 parts in reply to Feverpuller, 06-23-2018 23:43:10
|
|
| |
If you use the manifold with the larger exhaust pipe you will need to move the hole in the hood or put an offset in the pipe.
|
|
|
|
The tractor vet
06-24-2018 09:14:30
|
|
Re: C301 parts in reply to Feverpuller, 06-23-2018 23:43:10
|
|
| |
Any oil pan off any 460 on thru 856 GAS being C221on thru a C301 will work . Any Manifold off a C2221 on up to 301 will work . IF you are using a C301 out of a combine you have other changes to make also as you will need a different pick up tube for the oil pump, ft timing cover .
|
|
|
|
Feverpuller
06-24-2018 21:01:22
|
|
Re: C301 parts in reply to The tractor vet, 06-24-2018 09:14:30
|
|
| |
Thanks tractor vet. I'm just getting a feel for what all I'm looking at here. My 301 manifold has bigger diameter runners than 560 so I'd like to stay with it.
|
|
|
|
TWL
06-25-2018 19:51:10
|
|
Re: C301 parts in reply to Feverpuller, 06-24-2018 21:01:22
|
|
| |
Feverpuller I think I have some of the parts you are looking for. I'm the guy that you were talking with over at Kevins during dinner. I'm just east of Versailles close to Elrod. 1-812-571-0265. or tblovins@yahoo.com
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
The Collection of a Lifetime - by Sherry Schaefer. The larest gathering of orphan tractors ever assembled by one collector will be auctioned off on May 15 in Rock Island, IL. Ed Spiess was a well known tractor buff who spent most of his time dreaming of rare and unknown tractors. His background as an agricultural engineer sparked his interest in the unique attributes of the models built from 1939-1959.
... [Read Article]
Latest Ad:
Need a clutch shaft for a 46 Massey Harris 101 Jr., F162 Continental engine. About 18.25 inches long, to fit 1-1/8x 10 spline clutch disk. Bare shaft without sprocket or bearing is OK.
[More Ads]
Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
