|
| |
| Farmall & IHC Tractors Discussion Forum |
Farmall 460D injector leaking
| Author |
[Modern View] |
|
john athey
05-29-2018 08:37:33
|
I have one leaking around the threads- I see tiny air bubbles. How can I fix this? What do I need to do? I hear folks say replace o-ring? Please tell me how to do this. I hear it is easy? Thanks guys in advance?
|
|
|
|
87nassaublue
05-29-2018 15:15:58
|
|
Re: Farmall 460D injector leaking in reply to john athey, 05-29-2018 08:37:33
|
|
| |
Hi John, I had similar but more extreme issues on my 504. I think my seals on the injector lines were damaged or worn out. I coudln't get them to seal. I found some small O rings to put on the end of the injector line and got mine to seal. Some say they will blow out, but mine are holding well with no leaks. I figured it was worth a try and it worked.
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
Product Review - by Staff. When we finally checked out the 3000 PSI North Star, the whole story chaned. This unit was equipped with an 11 HP Honda engine with fuel shutoff, adjustable flow and optional syphon degreaser dispenser. It didn't have a pressure release or electric start to facilitate easy starting but according to the instructions, simply pulling on the trigger while cranking was sufficient. This method of starting proved more than adequate and kept the cost down on the unit. It had all the important
... [Read Article]
Latest Ad:
1967 Ford 3000
[More Ads]
Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
