It works! ( And I look dumb)

morgan in ar · May 20, 2018

It was the filter. I thought I had already changed it, then I noticed the new filter on my work bench. Thanks again for all the input. Now I have to get that filler tube out of the transmission.

WayneLee · May 20, 2018

Looks like you will be going thru a lot of front ends

roy prins · May 20, 2018

I like them 460;s and 560;s -- put a fork on the back for traveling and use the front end loader just for putting the bale in place -- Your front end will like You for it __ dont ask why I know -- Roy

morgan in ar · May 20, 2018

Just testing it out.

BarnyardEngineering · May 21, 2018

Is an aluminum tube really going to be a problem? Everything in there is hardened steel, which should just chew the aluminum up and spit it out if it does happen to get caught between a couple of gears.

But frankly if it hasn't caused any problem by now it is laying safely in the bottom of the sump. Just my humble opinion, but I would not worry about it much.

It works! ( And I look dumb)

morgan in ar

Member

WayneLee

Member

roy prins

Well-known Member

morgan in ar

Member

BarnyardEngineering

Well-known Member

Similar threads