|
| |
| Farmall & IHC Tractors Discussion Forum |
Tire Size
| Author |
[Modern View] |
|
johnnykick
05-04-2018 14:35:19
|
What tire size fits a front rim that measures 4 1/4" X 16"?
|
|
|
|
DR. EVIL
05-04-2018 16:49:58
|
|
Re: Tire Size in reply to johnnykick, 05-04-2018 14:35:19
|
|
| |
5.50x16, 6.00x16, or 6.50x16. If you wanted to, a 7.50x16 could be made to fit, but really should be on a 6x16 rim.
|
|
|
|
gene bender
05-04-2018 16:12:39
|
|
Re: Tire Size in reply to johnnykick, 05-04-2018 14:35:19
|
|
| |
what tractor 5.00x16 is probably the one you want
|
|
|
|
wicksfield
05-04-2018 15:53:22
|
|
Re: Tire Size in reply to johnnykick, 05-04-2018 14:35:19
|
|
| |
I've heard up to 2" over rim width. So 6.50? I'd check with your Ag tire supplier.
|
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
Product Review - by Staff. When we finally checked out the 3000 PSI North Star, the whole story chaned. This unit was equipped with an 11 HP Honda engine with fuel shutoff, adjustable flow and optional syphon degreaser dispenser. It didn't have a pressure release or electric start to facilitate easy starting but according to the instructions, simply pulling on the trigger while cranking was sufficient. This method of starting proved more than adequate and kept the cost down on the unit. It had all the important
... [Read Article]
Latest Ad:
1967 Ford 3000
[More Ads]
Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
