|
| |
| Farmall & IHC Tractors Discussion Forum |
SA-140 Hydraulic Pump Body Square O-ring
| Author |
[Modern View] |
|
rtr
12-29-2017 07:48:28
|
I recently bought some square cross section o-rings from McMaster Carr to use when rebuilding the hydraulic pumps on Farmall Super A, 100, 130, and 140 tractors. Now, I know I wouldn't have just randomly ordered some o=rings without some recommendation.....whether it was from the Case-IH parts site or a forum member and I had a number to verify the fitment. THese are the square cross section o-rings that fit in an oval shape sealing the 2 halves of the pump body together. I've pulled one out of the package and compared it to the used one from the pump and it is about twice the thickness of the original. I also compared it to one in a very old NOS IH rebuild kit (one that has not been used) and it is still about twice the thickness. For clarification I've also posted which o-rings I ordered from McMaster Carr. Wish I could figure out where I got the info to order them in the first place, but I can't. Someone please help so I can get the correct ones or hopefully these will still work. THANKS
|
|
|
|
|
Bob
12-29-2017 14:04:16
|
|
Re: SA-140 Hydraulic Pump Body Square O-ring in reply to rtr, 12-29-2017 07:48:28
|
|
|
AS568-228 ring is 2-1/2" OD X 2-1/4" X 1/8" thick. If the OD is correct, other off-the-shelf choices would be... AS568-036, 2-1/2" OD X 2-3/8" ID X 1/16" thick. AS569-141, 2-1/2" OD X 2-5/16" ID X 3/32" thick.
|
|
|
|
RTR
12-29-2017 12:56:11
|
|
Re: SA-140 Hydraulic Pump Body Square O-ring in reply to rtr, 12-29-2017 07:48:28
|
|
| |
Quoting Removed, click Modern View to see
The online parts book doesn't give deminsions or the standard oring number to go by. That is why I was trying to find the post I found the info in. It had info about the special toothed washer and a replacement inside tooth washer from McMaster Carr. Wish I could find that info. Could have been here or on Farmall Cub dot com
|
|
|
|
teddy52food
12-29-2017 10:38:21
|
|
Re: SA-140 Hydraulic Pump Body Square O-ring in reply to rtr, 12-29-2017 07:48:28
|
|
| |
Try ordering by dimensions & get ones that are thinner.
|
|
|
|
RTR
12-29-2017 10:20:33
|
|
Re: SA-140 Hydraulic Pump Body Square O-ring in reply to rtr, 12-29-2017 07:48:28
|
|
| |
Quoting Removed, click Modern View to see
Phil, that oring has a groove it fits in so it should work just fine in that sense. I'm just worried about the thickness
|
|
|
|
Phil Tibbetts
12-29-2017 11:49:51
|
|
Re: SA-140 Hydraulic Pump Body Square O-ring in reply to RTR, 12-29-2017 10:20:33
|
|
| |
Then as Teddy said you must have got the wrong size
|
|
|
|
Phil Tibbetts
12-29-2017 09:28:44
|
|
Re: SA-140 Hydraulic Pump Body Square O-ring in reply to rtr, 12-29-2017 07:48:28
|
|
| |
I don't think you are going to get a round o-ring to fit properly and seal. It needs to be preformed to fit the pump. IMO
|
|
|
|
RTR
12-29-2017 08:04:16
|
|
Re: SA-140 Hydraulic Pump Body Square O-ring in reply to rtr, 12-29-2017 07:48:28
|
|
|
The picture of the specs are hard to see. Sorry about that. Here is that picture again. 
|
|
|
|
RTR
12-29-2017 08:02:38
|
|
Re: SA-140 Hydraulic Pump Body Square O-ring in reply to rtr, 12-29-2017 07:48:28
|
|
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
Home
| Forums
Today's Featured Article -
Show Coverage: Fair Weather Tractor - by Dave M.. No, Fair Weather isn't some rare brand. It's the kind you can't leave out in the rain. Here's how it happened. I had been casually looking for a tractor for weeks. I saw a few 9N's, but they had even fewer amenities than the 8N my Grandpa bought new in '52 with a Dearborn loader. That was 10 years before I was born, so I grew up thinking that 8N was the world's best tractor. Grandpa had greenhouses, with over half an acre under glass, and that 8N did almost everything. It was the only
... [Read Article]
Latest Ad:
Green magazine back issues for sale, in good used condition, some of the covers have mild chaffing. Have years 1991, 1992, 1993, 1994, 1995, 1999, 2000, 2001, 2004 and 2006 years available. 12 issues per year. 10 dollars plus shipping per year.
[More Ads]
Copyright © 1997-2021 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
