Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

MD injector question

Welcome Guest, Log in or Register
Author 
Jeff D

03-04-2001 20:09:36




Report to Moderator

I need some expert advice. On the outside of the injector Nozzle Body Retainer, their is a machined groove around it about mid way down. When I pulled our injectors out of the head, 2 of them had what looked like some sort of seal in this groove. 1 had some sort of orange o-ring that fit the whole groove and the last one had what looked like a regular black o-ring that didn't fill up the groove. Upon looking in the parts book, it doesn't call out for anything in this groove. Could someone set me straight as to what to use in this groove if anything? Thanks in advance.

[Log in to Reply]   [No Email]
Jason

03-08-2001 18:04:01




Report to Moderator
 Re: MD injector question in reply to Jeff D, 03-04-2001 20:09:36  
Jeff there is supposed to be a rubber type O ring in the top groove of the injector and there should be a copper or some type of metal sealing ring on the end of the injector where it fits into the precup chamber. We got our seals and rings from our local IH dealer.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy