I have posted before about this but I really need some help finding a NOS Farmall 560 inner axle bearing. I found one and I just need 1 more the part number is 375215R91 if anyone knows where I can find one or point me in the right direction it would be greatly appreciated. Thanks a lot!

http://www.tractorshed.com/cgi-bin/photoads/classifieds.cgi?search_and_display_db_button=on&db_id=647806&query=retrieval

AG

I come up with 375216R91. Note 6....

I think that is the same bearing as the 375215R91 do you know where I could find that bearing at?

do a google search for 375215R91, a lot of places come up

If you can remove the bearing and acquire the OEM numbers etched or stamped into either race, or the rubber seal (if equipped) then you can typically find somewhere to cross-reference it.

If not, all is not lost. The tool I prefer is a digital or dial caliper to measure the thickness, the OD of the outer race and the ID of the inner race. I'm not sure when SAE measurements and metric measurements occur in the various tractor lines but it should come up to a fairly nominal size in either system.

Next is to understand any pecularities with the seal(s) and or special features like snap ring grooves. As mentioned a good bearing supply can help a lot with sourcing and there are some online suppliers with warehouses of NOS bearings that might have 40yo packaging but the bearing is still in new condition.

While i would think you can still get it from case IH, a local bearing shop should have or be able to get it cheaper. In our area Standard Bearing is the goto place for any bearings, they are especially happy if you have the part number which I sometimes lack. Good luck

Joe

Thanks for the reply and case IH now no longer makes the part so I was tryin to find another NOS bearing to match the one I already have

E bay lists used ones if that is option.