2 row mounted cultivator for a B

55 50 Ron · Jul 7, 2016

Looking for instructions for mounting a 2 row cultivator on a Farmall "B". Can probably figure it out without instructions, but would be faster with them.

Thanks.

1946 BN IHC · Jul 7, 2016

I have a full set of instructions for a mounted cultivator and a set of instructions for the pneumatic lift all as well that operates the cultivator unit
What is your location I am in Thamesford Ontario Canada
Wm.

Badger bob · Jul 7, 2016

Ron I just picked up a B cultivator from Gene Bender. there not that hard to put on .mount the fronts and then the backs and then see what you have left. that's the way I did mine. binder book mite be a good place to start. if you need help were hear. bob

gene bender · Jul 7, 2016

There you go get the manual from the friend in Canada it will be anoriginal and not reprint you can read.

Jim Becker · Jul 7, 2016

Which cultivator? The B-221 (gang shifting) is totally different than the B-236 and B-238. Like Badger Bob said, you should be able to figure it out (except probably the power lift stuff if you have that).

1946 BN IHC · Jul 8, 2016

Dear Jim
As I have said I have a complete set of Original manuals which I am willing to copy for you.
I havent counted all the pages cut I would guess at twenty with the part on lift setup.
I would be pleased to copy and send to you.
Fell free to write or call me; I am home most evenings during the week; or saturday morning at around 8;30 this week since
we have to go to a friends to pick up meat for the freezer.
Phone number 226-289-3252
Wm.

Jim Becker · Jul 8, 2016

Ron is the guy needing the manual. I'm just trying to get both of you on the same page so you can send him the right manual for whatever cultivator he has.

1946 BN IHC · Jul 8, 2016

thank you jim
A note to Ron as well
I am standing by to hear from Ron. I was just looking at my information; there are a total of 32 pages between all 3 manuals
which I could copy and send for a small cost of about 15 to 20 Canadian. Those are right from the manufactures hand books
given to owners at time of purchase. My father was very particular about al his equipment and the manuals for them, so I have
many different A,B,BN, and some of the mauls also incorporate C in the mounted mower.
Wm.

Rich'sToys · Jul 8, 2016

Ron is out of town for the weekend, but I'm sure he will be checking in again in a couple days. Thanks for the info. I may be helping him with this project.

1946 BN IHC · Jul 21, 2016

Dear Ron
From William
I have a set of instructions fro setup and installation of the cultivators for the B and BN including set up of the pneumatic lift.
There are about twenty pages in all I would be pleased to copy and send them to you for the cost of doing so approximately $5.00 plus shipping Canadian. My home number is 2262893252 evenings
Thank you Wm.

2 row mounted cultivator for a B

55 50 Ron

Well-known Member

1946 BN IHC

Member

Badger bob

Member

gene bender

Well-known Member

Jim Becker

Well-known Member

1946 BN IHC

Member

Jim Becker

Well-known Member

1946 BN IHC

Member

Rich'sToys

Well-known Member

1946 BN IHC

Member

Similar threads