Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Wide front end ???

Welcome Guest, Log in or Register
Author 
Rick

02-06-2001 03:51:35




Report to Moderator

Can anyone tell me if a wide front end off a int 450 will some how fit a farmall h




[Log in to Reply]   [No Email]
Dick N.

02-06-2001 11:28:52




Report to Moderator
 Re: wide front end ??? in reply to Rick, 02-06-2001 03:51:35  
Since you said somehow and if it is an aftermarket it shouldn't be to hard. The bolster mount will have to be redrilled to match the H's narrower frame. Then the back support will have to be redrilled also and the ends of the frame mounting cut off. The same will have to be done on the steering linkage. Hope this will help you.



[Log in to Reply]  [No Email]
Jim

02-06-2001 17:38:42




Report to Moderator
 Re: Re: wide front end ??? in reply to Dick N., 02-06-2001 11:28:52  
The only difference is the turning arm and the rear mount. the bolster is the same



[Log in to Reply]  [No Email]
George

02-06-2001 10:21:00




Report to Moderator
 Re: wide front end ??? in reply to Rick, 02-06-2001 03:51:35  
Rick: Lookin for a w.f.e. for 400-806 do you have one for sale? Geo.



[Log in to Reply]  [No Email]
JLE

02-06-2001 04:43:07




Report to Moderator
 Re: wide front end ??? in reply to Rick, 02-06-2001 03:51:35  
NO



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy