Duplex hopper

1legonutt

Member
I got this last Friday at an auction. Nicest one I have ever seen. Only a little rust at the bottom any recommendations on how to get the rust under control my thought is to hand sand then clear coat to protect. But I am open to opinions. By the way the feed regulator works fine I'm very surprised.

Rob
a206488.jpg

a206489.jpg

a206490.jpg

a206491.jpg

a206492.jpg

a206493.jpg

a206494.jpg
 
were it mine I would do a serious clean to metal, possibly etch to clean, then use lead free solder to tin the whole rusty area. An electric iron of 450 watts would be needed. Jim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top