John Deere 350b steering clutch tool jd-7

Ron Bailey · Apr 7, 2023

I have searched the archives and found the question asked a
few times but have not found the answer to this question.

I need the dimensions of the JD-7 steering clutch gauge

What I would like to know is the distance the clutch needs to be
set. Im posting a picture of the measurement I need, between
the two red lines that I drew. I think it should be about 1 1/2
inches.

Ron Bailey · Apr 7, 2023

If you have a jd-7 gauge, I need the distance from
The top red line (small line) to the long line.

Ron Bailey · Apr 7, 2023

timbertime2 · Apr 7, 2023

On my gauge it measures 15/16 inch red line to red line which is for the JD350. The gauge also measures for a JD1010 and that measurement is 1 1/2 inch

Ron Bailey · Apr 7, 2023

Thanks a million buddy. That helps me a lot!!
Mine is off by about 1/8.

John Deere 350b steering clutch tool jd-7

Ron Bailey

Member

Ron Bailey

Member

Ron Bailey

Member

timbertime2

Member

Ron Bailey

Member

Similar threads